|
| |
TM 10-4930-229-12&P
4-15. Tee Fitting Assembly (cont).
Figure 4-7. Tee Fitting Disassembly/Assembly.
(2) Reassembly.
(a) Apply sealing compound to threads and screw each coupling half into tee (6).
(b) Install new gaskets (3) in coupling halves.
(c) Install dust plugs (1) in female coupling halves (4) and install dust cap (2) on male coupling half (5).
b. Replace.
(1) Removal.
(a) Pull upon camlock levers on two suction hoses and remove suction hoses from tee assembly.
(b) Pull upon camlock levers on tee assembly and remove tee assembly.
(2) Installation.
(a) Position tee assembly on suction hose, and secure by pushing down on camlock levers.
(b) Position tee assembly, and secure by pushing down on camlock levers.
4-22
|
