|
| |
TM 10-4320-351-14
Figure 4-5. Inlet Manifold Outlet O-Ring Replacement
4.10.2 Replace Two-Inch Valved Unisex Coupling. (Refer to figure 4-6.)
This task consists of:
a. Removal
b. Installation
INITIAL SET-UP:
Tools:
Materials/Parts Required:
Tool Kit, General Mechanics
Petrolatum (Appendix F, Section II, Item 10)
(Appendix B, Section III, Item 1)
Rag, Wiping (Appendix F, Section II, Item 4)
Chemical and Oil Protective Gloves
Seal (Appendix I, Item 3)
(Appendix B, Section III, Item 2)
O-Ring (Appendix I, Item 48)
O-Ring (Appendix I, Item 57)
O-Ring (Appendix I, Item 51)
General Safety Requirements:
Equipment Condition:
Pump assembly shut down (para. 2.6)
All fuel hoses removed from inlet manifold
WARNING
(TM 10-4930-250-13&P)
Fuels are toxic and flammable. Do not get on person
or clothing. Work in well ventilated area. Do not
smoke. Ensure equipment is well grounded.
·
Using dry cleaning solvents incorrectly can cause
Injury or even death.
·
Fuel is flammable. Do not smoke.
4-16
|
