|
| |
TM 10-4320-351-14
Table 2-3. Operator's Preventive Maintenance Checks and Services for Pumping Assembly
Location
Procedure
Not Fully Mission
Item
Interval
Item to
Capable if:
No.
Check/
Service
2
Before
Air Filter
Check condition of air filter element (1). Remove element and tap
lightly against hand to remove clogging. Replace element if
required. Verify that dust ejector (2) points down when cover (3)
is installed. Check condition of hose (4) and tightness of hose
clamps (5).
3
Before
Pump-Engine
Inspect ground cable for cuts, breaks or loose connections.
Cuts, breaks or loose
Module
connections make
Ground
ground cable unusable.
Cable
4
B
Pump-Engine
Inspect fuel and oil lines for cuts, breaks or loose connections.
Fuel or oil lines are cut,
Module Fuel
broken or have loose
and Oil
connections.
Lines
2-7
|
