|
| |
TM 10-4320-351-14
6.4.21 Install Fuel Pump. (Refer to figure 6-45.)
This task consists of:
a. Installation
INITIAL SET-UP:
Tools:
Materials/Parts Required:
13 mm socket wrench
Nut, Self-Locking (Appendix I, Item I)
(Appendix B, Section III, Item 3)
Gasket (Appendix I, Item 77)
14 mm combination wrench
(Appendix B, Section III, Item 3)
3/8 in. drive ratchet wrench
(Appendix B, Section III, Item 3)
Equipment Condition:
Fuel pump removed (para. 6.3.9)
Camshaft installed (para. 6.4.7)
a.
Position gasket (1) on crankcase (2).
b.
Position drive rod (3) and fuel pump (4) on crankcase (2).
c.
Install and tighten self-locking nuts (5) securing fuel pump (4).
Figure 6-45. Fuel Pump Installation
6-72
|
