|
| |
TM 10-4320-351-14
Figure 2-2. Engine Module Electrical Connection Panel
Table 2-2. Electrical Connection Panel Connectors
No.
Name
Function
I
NATO Connector 1A1J1
Battery input connector or other external 28 VDC source.
2
Connector 1A1J2
Control cable connector from accessory module.
3
Connector 1A1J3
Pumpage overtemperature sensor cable connector.
Section II. OPERATOR PREVENTIVE MAINTENANCE
CHECKS AND SERVICES (PMCS)
2.1 GENERAL.
Preventive Maintenance Checks and Services (PMCS) involves systematic caring, inspection, and servicing of equipment
to keep it in good condition and prevent breakdowns. Table 2-3 lists the pumping assembly PMCS. Service intervals are
divided into categories: B - Before Operation; D - During Operation; A - After Operation; and various other checks and
services to be performed at prescribed hourly intervals. Table 2-3 organizes your PMCS tasks in chronological sequence.
As the pumping assembly operator, you should:
a.
Perform your PMCS as scheduled in table 2-3. Always do your PMCS in the same order, so it gets to be a habit.
Always assume explosive vapors are present at the pumping assembly. Do not allow any smoking or spark
producing equipment within fifty feet of the pumping assembly while performing your PMCS.
2-3
|
