|
| |
TM 10-4320-351-14
WARNING
Fuel vapors are flammable. Residual fuel may be present in the fuel line. Catch
the fuel in a drain pan. Immediately wipe up any fuel that may spill.
g.
Remove union bolt (17), union (18) and washers (19). Discard washers (19).
NOTE
Support oil cooler during removal of oil lines.
h.
Remove union bolt (20), washer (21) union (22), and spacer (23) connecting the oil supply line to the oil cooler
(9). Discard washer (21).
i.
Remove union bolt (24), washer (25), union (26), spacer (27) and connecting the oil return line to the oil cooler
(9). Discard washer (25).
j.
Remove the socket head cap screw (28) and washer (29) securing the oil cooler to gate (30). Remove oil cooler
(9).
k.
Remove oil supply line (31) at the crankcase.
i.
Remove oil return line (32) at the crankcase.
m. Remove fuel shutoff solenoid wire from clip (33).
n.
Remove the two bolts (34) and washers (35) attaching gate (30). Remove gate, snaking fuel feed line from the
fuel feed pump through the gate.
o.
Remove nut (36) and washer (37) attaching gate (38) to tie rod (39).
p.
Remove tie rod (39) from between cylinders.
q.
Remove nut (40) and washer (41) attaching lifting eye (42) to cylinder head.
6-8
|
