|
| |
TM 10-4320-348-14
d.
Installation.
(1)
Refer to wire tags and attach all wires to electrical connector (16).
(2)
Position sound enclosure rear panel assembly (11) on frame (12) and secure to threaded rod (15) with two
washers (14) and two wing-nuts (13).
(3)
Secure sound enclosure rear panel assembly (11) to frame (12) with three self-locking nuts (10), and three
cap screws (9).
(4)
Align lifting handle assembly and strap plate (5) to frame (12) and secure with two self-locking nuts (8), four
washers (7), and two cap screws (6).
(5)
Install discharge coupling elbow (3).
(6)
Position spark arrestor (2) and secure with clamp (1).
4-26
|
