| |
TM 10-4320-348-14
(Refer to Figure 5-12)
(4)
Attach return spring (1) to the governor lever (2) and to regulator lever (3).
(5)
Attach regulator spring (4) to the second hole from the left on the governor lever (2) and connect spring to
second hole from the left on regulator lever (3).
(6)
Attach throttle control inner wire (6) to regulator lever (3).
(7)
Lubricate all moving parts with lubricating oil.
d.
Adjustment.
CAUTION
DO NOT operate pump assembly it all fluid (product) has been removed from pump.
Pump unit will be severely damaged without product in the volute.
Check engine RPM (3,800 max. unloaded, 3,650 max. loaded). Adjust bolt (5) until engine operates at proper RPM.
5-23/(5-24 Blank)
|