|
| |
TM 10-4320-348-14
a.
Removal. (Refer to Figure 5-11)
(1)
Remove throttle control inner wire (1) from the regulator lever (3).
(2)
Remove regulator spring (2) from the governor lever and regulator lever (3).
(3)
Remove return spring (4) from the governor lever and regulator lever (3).
(4)
Remove mounting bolts (5 and 6).
(5)
Remove regulator bracket (7) with regulator lever (3) attached.
(6)
Remove regulator coil spring (8).
(7)
Remove regulator lever (3) from regulator bracket (7) by unscrewing lever retainer (9) and self-locking nut
(10).
b.
Inspection.
(1)
Clean all parts with diesel fuel.
(2)
Inspect all components for damage or excessive wear. Replace any components damaged or worn.
c.
Installation.
(1)
Install regulator coil spring (8).
(2)
Mount regulator lever (3) to regulator bracket (7) using the retainer (9). Secure with self-locking nut (10).
(3)
Mount regulator bracket assembly (7) with mounting bolts (5 and 6).
Figure 5-12. Speed Control Device Springs
5-22
|
