|
| |
TM 10-4320-343-14
The following installation procedure must be made with the
assistance of unit level maintenance personnel.
d .
When loaded on a flat bed truck perform the following:
Do not lift 350 GPM pumping assembly without lifting device.
Failure to obey this warning may result in serious personal
i n j u r y.
Do not stand under 350 GPM Pumping Assembly.
Failure to obey
this warning may result in serious personal injury.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
Attach lifting equipment to lifting support and remove tie down chains
from 350 GPM Pumping Assembly.
Lift the 350 GPM Pumping Assembly from flatbed trailer.
Position pumping assembly as close as possible to fuel source.
Keep
suction lift as low as possible.
To prevent rolling or sliding, do not work on equipment that is
not securely stabilized.
Ensure both wheels of the equipment
are secure.
Failure to obey this warning may result in serious
personal injury.
Secure wheels (6) and remove ground rod (7).
Drive ground rod (7) into ground.
Connect ground cable (8) between ground rod (7) and ground studs (9).
Refer to data plate and ensure two fuel selector valves (10) are
positioned as follows:
Fuel tank as source to TANK
Auxilary supply as source to FUEL AUX
2-13/(2-14 blank)
N O T E
|
