|
| |
TM 10-4320-343-14
4.10.21 Cooling Fan Maintenance.
This task covers: 4.10.21.1 Removal 4.10.21.2 Installation
INITIAL SETUP
Tools
General Instructions
General Mechanic's Tool Kit (appendix B,
Section III, Item 1)
Do not work on equipment without
following standard shop safety
Equipment Conditions
precautions.
Equipment shut down, refer to
paragraph 2.5.1.2 or 2.5.2.2.
Cooling fan belt removed
(paragraph 4.10.8).
Figure 4-31. Cooling Fan Maintenance.
4.10.21.1
Removal.
a.
Remove one nut (figure 4-31, 1), five washers (2), and four bolts (3).
b.
Remove cooling fan (4).
4.10.21.2
Installation.
a.
Position cooling fan assembly (4) on engine.
b.
Install four bolts (3), five washers (2) and one nut (1).
4-59
|
