|
| |
TM 10-4320-343-14
4.10.4.2 Temperature Switch Maintenance. (Used on Model 350 PAFN only)
This task covers:
4.10.4.2.1
Removal
4.10.4.2.2
Installation
INITIAL SETUP
Tools
General Safety Instructions
General Mechanic's Tool Kit (appendix B,
To prevent rolling or sliding, do not work on equipment
Section III, Item 1)
that is not securely stabilized.
Materials/Parts
Do not work on equipment without following standard
shop safety precautions.
Tags (appendix E, Section II, Item 12)
Equipment Conditions
Equipment shut down, refer to paragraph 2.5.2.2.
4.10.4.2.1. Removal. (Refer to Figure 4-7.2)
a.
Tag and cut wires from temperature switch (1) to valve assembly and starter solenoid (figure 4-7,2, 1).
b.
Remove screw (2) and flat washer (3) and temperature switch from side of engine.
4.10.4.2.2. Installation. (Refer to Figure 4-7.2)
a.
Position temperature switch (1) on side of engine and secure with screw (2) and flat washer(3).
b.
Install new connectors on wires and connect wiring as tagged during removal.
Figure 4-7.2. Starting Aid Temperature Switch (Model 350 PAFN).
Change 1 4-22.3
|
