|
| |
TM 10-4320-342-24
3-32.
INDICATOR LIGHTS (ENGINE, ENGINE OIL TEMP AND CLUTCH DISENGAGED) REPLACEMENT
(TYPICAL).
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Condition
General Mechanics Tool Kit (App B, Sect III,
Battery disconnected (Para 2-62)
Item 1)
200/600 GPM Pump Assembly removed from
Wire Stripper (App B, Sect III, Item 3)
system (Para 2-9, TM 10-4320-342-10)
Electrical Repair Kit (App B, Sect III, Item 3)
Solder Gun (App B, Sect III, Item 3)
Materials/Parts
Solder (App E, Item 24)
Sleeve (Heat Shrink) (App E, Item 31)
Tags (App E, Item 16)
NOTE
This procedure covers the ENGINE INDICATOR light. Replacement of ENGINE OIL
TEMP (Oil Temperature) and CLUTCH DISENGAGED lights are identical.
a. REMOVAL. Refer to Figure 3-55.
(1)
Open and lock cover (1) in place.
(2)
Open control panel (2).
(3)
Remove lens cap (3) and incandescent lamp (4) from indicator light (5).
(4)
Remove heat shrinks (6) and tag wire leads (7) on indicator light (5).
(5)
Unsolder and remove wire leads (7) from indicator light (5).
(6)
Remove nut (8), washer (9), nut (10) and indicator light (5) from control panel (2).
b. INSTALLATION.
(1)
Install indicator light (5), nut (8), washer (9) on control panel (2).
3-117
|
