|
| |
TM 10-4320-342-24
3-9. PUMP AND CLUTCH (600 GPM FUEL PUMP) REPAIR -continued.
CAUTION
To prevent premature failure of pump and clutch, beveled end of hub must face
away from retainer plate.
Refer to Figure 3-14.
(24)
Position spring washer (11), washer (12), hub (10), carrier (13) and armature (14) on retainer plate (15). Secure
components to retainer plate (15) with four screws (16) and nuts (17).
(25)
Install key (18) on shaft (3).
Figure 3-17. Selecting Shim Stack Number Three (600 GPM Fuel Pump)
3-44
|
