|
| |
TM 10-4320-342-24
3-19. PUMP AND CLUTCH (600 GPM FUEL PUMP) REPAIR - continued.
Refer to Figure 3-13.
(13)
Pull bearing (1) from pump shaft (2).
(14)
Secure opposite end of shaft (2) with allen wrench and remove nut (3) and flat washer (4).
(15)
Remove assembled clutch components (5) and key (6) from shaft (2).
(16)
Remove shim stack (7).
NOTE
To aid assembly of pump and clutch, measure and record thickness of shim
stacks.
(17)
Using hi-torque adapter, remove three screws (8) and bearing retainer (9).
(18)
Press shaft (2) out of bearing carrier (10).
(19)
Press bearing (11), shim stack (12) and seal (13) from bearing carrier (10).
(20)
Remove inserts (14) from bearing carrier (10).
(21)
Remove four nuts (15) and screws (16) from clutch components (5).
(22)
Separate armature clutch (17), carrier armature (18), retaining ring (19), hub armature (20), flat washer (21),
spring tension (wavy) washer (22) and retainer plate (23).
3-34
|
