|
| |
TM 10-4320-342-24
3-19. PUMP AND CLUTCH (600 GPM FUEL PUMP) REPAIR - continued.
(9)
Remove elbow (17) and bushing (18) from bearing carrier (19).
(10)
Remove eight nuts (20) and washers (21) and separate bearing carrier (19) from diffuser housing (7).
(11)
Cut safety wire and remove plug (22), preformed packing (23) and studs (24) from diffuser housing (7). Discard
preformed packing.
(12)
Remove eight nuts (25), washers (26), bolts (27) and washers (28). Separate clutch housing (29) from
bearing
carrier (19).
Figure 3-12. Pump and Clutch (600 GPM Fuel Pump) Disassembly
3-33
|
