|
| |
TM 10-4320-342-24
2-64. BATTERY TRAY REPAIR - continued.
d. ASSEMBLE. Refer to Figure 2-91, Sheet 2 of 2.
(1)
Install spacers (9 and 10), lock plate (8), flat washer (7), lock washer (6) and screw (5).
(2)
Install insulations (1, 2, 3 and 4).
Refer to Figure 2-91, Sheet 1 of 2.
(3)
Apply adhesive to grommet (33) and install on battery tray (3).
(4)
Install foams (31 and 32) and rivnuts (34) on battery tray (3).
(5)
Position bracket (30) on battery tray (3) and install screw (29), flatwashers (27 and 28) and nuts (26)
(6)
Install rod (23), flatwasher (25) and cotter pin (24) on battery tray (3).
(7)
Install nut (22), flatwasher (21) and wing nut (20) on rod (23).
(8)
Install flatwasher (18), bushing (17), spring (16), flatwashers (14 and 15), spacer (13), lock plate (12) and
flatwasher (11) on bolt (19).
(9)
Install bolt (19) on battery tray (3) and secure with flatwasher (10) and nut (9).
(10)
Position pin block (8) on battery tray (3) and secure with flatwasher (7), lockwasher (6) and bolt (5).
e. INSTALLATION.
(1)
Install bushings (4) in battery tray (3) and 200/600 GPM Pump (2).
(2)
Position battery tray (3) on 200/600 GPM Pump (2) and install pin (1).
2-217
|
