| |
TM 10-4320-342-24
2-32. JET EJECTOR REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Condition
General Mechanics Tool Kit (App B, Sect III,
200/600 GPM pump assembly removed from
Item 1)
system (Para 2-9, TM 10-4320-342-10)
Material/Parts
Antiseize Tape (App E, Item 6)
a.
REMOVAL. Refer to Figure 2-52.
(1)
Open door panel (1).
(2)
Disconnect tubes (2, 3 and 4) from jet ejector (5) and remove jet ejector.
(3)
Remove adapters (6, 7 and 8) from jet ejector (5).
b.
INSTALLATION.
NOTE
Install antiseizing tape (teflon tape) on all male pipe threads and wrap tape in
direction of threads. Do not allow teflon tape to extend beyond end of threads.
(1)
Install adapters (6, 7 and 8) on jet ejector (5).
(2)
Connect tubes (2, 3 and 4) on jet ejector (5).
(3)
Close door panel (1).
2-133
|