|
| |
TM 10-4320-342-24
2-31. PRIMING SHUT OFF VALVE (BALL VALVE) REPLACEMENT - continued.
(2)
Install elbow (3) on adapter (15) as noted during removal.
(3)
Install adapter (14) in valve (12).
(4)
Install union (13) on adapter (14).
(5)
Install elbow (9) in union (13) as noted during removal.
(6)
Position clamp (7) on valve (12).
(7)
Position assembled components on panel and install flatwasher (11) and nut (10).
(8)
Install bolt (6), flatwashers (5) and nut (4).
(9)
Connect tubes (2 and 8) onto elbows (3 and 9).
(10) Install panel (1).
Figure 2-51. Priming Shut Off Valve (Ball Valve) Replacement
2-132
|
