|
| |
TM 10-4320-342-24
2-25. FEMALE FLANGE ADAPTER REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Material/Parts
General Mechanics Tool Kit (App B, Sect III,
Locknuts (App F, Item 38)
Item 1)
Lubricate (App E, Item 18)
Torque Wrench: 0-600 foot-pounds (App B,
Gasket (App E, Item 10)
Sect III, Item 2)
Material/Parts
Equipment Condition
Preformed Packing (App F, Items 3, 46, 47 and
200/600 GPM pump assembly removed system
48)
(Para 2-9, TM 10-4320-342-10)
NOTE
This procedure covers the female flange adapter on the 200 GPM pump.
Replacement of the female flange adapter on the 600 GPM fuel pump is similar.
a.
REMOVAL. Refer to Figure 2-45.
(1)
Remove locknuts (1), flatwashers (2) and bolts (3) from female flange adapter (4) and pump and clutch assembly
(5). Discard locknuts.
(2)
Remove screen (6) and preformed packing (7) from female flange adapter (4). Discard preformed packing.
NOTE
The location of adapter (9) is different between the 200 GPM and 600 GPM pumps.
Also, swivel elbow (8) is used only on the 200 GPM pump.
(3)
Remove swivel elbow (8), adapter (9) and preformed packing (10). Discard preformed packing.
NOTE
Only remove swivel elbow (11) and preformed packing (13) on the 600 GPM pump.
(4)
Remove elbow (11), adapter (12) and preformed packing (13). Discard preformed packing.
2-118
|
