|
| |
TM 10-4320-324-14
(12) Place new locating ring on valve guide and
drive longer end of guide into bore from the
rocker arm side. Drive in until locating ring
seats in guide bore.
(13) After head cools, ream valve guides using
special 8.0 mm (0.3149 in.) reamer (6).
d.
Assembly.
(1) Install intermediate ring.
(2) Reseat valve seats and install valves (6 and 7).
(3) Inspect valve rotators (5) for free rotation and
install over valve guide (8).
(4) Using spring compressor, install spring (4), with
close coils on rotator (5).
(5) Install spring caps (3) and tapered spring keeper
(2) in cylinder head (1).
e.
Follow-on Maintenance. Install cylinder head (para
5-22).
END OF TASK
6-41
|
