|
| |
TM 10-4320-324-14
(8)
Install two pushrods (10) with cup ends up.
(9)
Install two flat washers (9), two screw plugs (8), rocker arm assembly (7), and three nuts (6).
NOTE
Ensure that old gasket material is removed from cylinder head and rocker cover.
(9)
Install new gasket (5).
(10)
Install rocker cover (4), two flat washers (3 and 2), and bolt (1).
d.
Follow-on Maintenance.
(1)
Install V-belt guard (para 4-31).
(2)
Install engine cowlings (para 5-19).
(3)
Install intake and exhaust manifold (para 5-18).
(4)
Install fuel injection nozzle (para 5-15).
(5)
Adjust valve clearance (paragraph 4-49).
(6)
Install muffler (para 4-28).
(7)
Check for leaks and proper operation.
END OF TASK
5-73
|
