|
| |
TM 10-4320-324-14
d.
Assembly.
(1) Pack two bearings (7 and 10) with grease.
(2) Apply grease and install inner race (11) bearing (10), and seal (9).
(3) Apply grease and install inner race (8) and bearing (7).
e.
Installation.
(1) Coat spindle (6) with grease and install hub assembly (5).
(2) Install washer (4). Tighten nut (3) and rotate hub (5) in forward and backward direction. Adjust nut until
hub turns freely.
(3) Install cotter pin (2) and dust cap (1).
f.
Follow-on Maintenance. Install tire and wheel (para 4-61).
END OF TASK
4-195
|
