|
| |
TM 10-4320-324-14
b.
Disassembly.
(1)
Remove outer bearing (7) and outer race (8).
(2) Remove seal (9), inner bearing (10), and inner race (11).
c.
Cleaning/Inspection.
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are
harmful to skin and clothing. To avoid injury or death, keep away from open fire and use in well ventilated
area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and
water.
Do not DRY SPIN bearings with compressed air. Bearings may fly apart causing injury to personnel and
damage to bearings.
(1) Remove and clean grease in hub and on spindle. Inspect hub for cracks.
(2) Clean all metal parts with dry cleaning solvent and dry with cloth.
(3) Check bearings for pitting, rusting, and wear.
(4) Check races for grooves.
(5) Check studs for thread damage.
(6) Replace all parts failing inspection.
4-194
|
