|
| |
TM 10-4320-324-14
4-62.
Wheels and Tires Repair/Replacement.
This task covers:
a.
Removal
c.
Cleaning/Inspection
e. Installation
b.
Disassembly
d.
Assembly
INITIAL SETUP:
Tools
Equipment Condition
Tool kit, general mechanics: automotive, item 32,
Engine shut down (para 2-7).
section III, appendix B
Tire iron, item 33, section III, appendix B
General Safety Instructions
Jack, hydraulic, item 33, section III, appendix B
Ensure that pumping unit is on level ground
Brush, wire, item 33, section III, appendix B
before lifting. Chock wheel(s) before removal.
a.
Removal.
(1) Chock wheel opposite the one to be removed.
(2) Secure the leg on side opposite tire being removed in the up position.
(3) Secure the leg on the same side as the tire being removed in the down position.
(4) Loosen five nuts (1).
(5) Remove plug buttons (2) over jack holes.
(6) Position a jack under the rear corner.
(7) Raise tire (3) clear of ground using floor jack on frame (7).
(8) Remove five nuts (1).
(9) Remove tire (3) and wheel (4).
b.
Disassembly.
(1) Place tire (3) flat on floor with valve (5) facing upward.
(2) Remove tire bead (8) from wheel (4).
(3) Remove inner tube (6).
(4) Remove tire (3) from wheel (4).
4-191
|
