|
| |
TM 10-4320-324-14
Table 1-1.
Equipment Data - CONT.
Piston crown clearance (measured with lead wire) ........................................................ 0.040 to 0.047 in. (1.0-1.2 mm)
Injection release pressure . ......................................................................................................... 2489.1 psi (175+8 bar)
Firing order .......................................................................................................................................................... 1-2-3
Compression ratio . .................................................................................................................................................17:1
Pump Specifications
Type ..............................................................................................Single stage, centrifugal flow, variable displacement
Output volume .........................................................................................................................350 GPM at 250 ft. head
Designed working pressure ............................................................................................................125 psi (8.7 kg cm2)
Designed suction pressure ...............................................................................................................20 psi (1.4 kg cm2)
Type lube system .............................................................................................................. ."0" pressure, self-contained
Suction and discharge size . ............................................................................................................. 4 inches (101 mm)
Capacities
Fuel tank . ...................................................................................................................................... 19 gallons (72 liters)
Crankcase ....................................................................................................................................... 8.5 quarts (8 liters)
Pump oil ...............................................................................................................................8 ounces (226.792 grams)
1-17. Safety, Care, and Handling.
Table 1-2 lists some of the hazards associated with working with the pumping assembly.
Table 1-2. Significant Hazards
Operating
Hazard
Safety Recommendation
Condition
Carbon monoxide
Do not operate pumping assembly in an enclosed area
Normal
(exhaust gas)
unless exhaust gases are piped to the outside and
adequate ventilation is provided.
Fuel spills when using
No smoking, flames, or sparks within 50 ft (15.2 m)
Normal
pumping assembly
model 13229E8400.
Fuel spills when refilling
No smoking, flames, or sparks within 50 ft (15.2 m)
Normal
the fuel tanks.
Connecting towing device
Chock both wheels to prevent pumping assembly from
Normal
rolling.
1-11
|
