|
| |
TM 10-4320-324-14
d.
Installation.
(1) Install shutdown solenoid assembly (12) with two flat washers, (11), two lockwashers (10), and two mounting bolts
(9).
(2) Install washer (8), lockwasher (7), nut (6), and pin (5).
CAUTION
Ensure that positive (+) terminal is connected to ground.
(3) Refer to tags and install three wires (4).
(4) Install filter support (3) with two flat washers (2) and two screws (1).
e. Follow-on Maintenance.
(1) Install oil line (para 4-56).
(2) Install oil filter (para 4-52).
(3) Install fuel filter (para 4-43).
(4) Install fuel line from feed pump and injection pump (para 4-41).
(5) Bleed fuel lines (para 4-45).
END OF TASK
4-127
|
