|
| |
TM 10-4320-324-14
CAUTION
Only remove nut (11) when replacing nut or stud (12). Thread locking compound is used to secure studs.
Studs will be damaged when removed.
(5) Remove extension (13), throttle rod (14), and set screw (15).
b. Cleaning/Inspection.
(1) Inspect and clean all parts.
(2) Replace defective parts.
c.
Assembly.
(1) Assemble throttle rod (14) and extension (13). Install set screw (15).
(2) Install clip (10), sleeve nut (9), spacer (8), straight pin (7), cotter pin (6), and set screw (5).
(3)
Install bellows (3) and clamp (4).
(4) Install knob (1) inside of control box.
END OF TASK
4-123
|
