|
| |
TM 10-4320-324-14
4-38. Main Wiring Harness Repair/Replacement (CONT).
(7) Remove nut (23), lockwasher (24), wire
(25), nut (26), lockwasher (27), cable (28),
and two wires (29) from starter (30). Tag
wires.
b.
Cleaning/Inspection.
(1) Inspect harness for cracks, cuts, abrasions, and loose ends. Replace if damaged.
(2) Check individual wires for loose solder connections at connectors. Repair solder connections and replace
connectors if damaged.
4-116
|
