|
| |
TM 10-4320-316-14
4-6. INSTALLATION INSTRUCTIONS. Continued.
b.
Assembly of Equipment. - Continued.
(4)
Make sure all connections are tight.
(5)
After the DED pump has been assembled, the following steps must be performed before attempting to start
the engine.
(a)
Fill the fuel tank with diesel fuel (Refer to paragraph 2-7).
(b)
Make sure the engine is perfectly level. Remove the dipstick cap and fill with oil according to the
ambient temperature. (Refer to L010-4320-316-12.)
(c)
Check the oil level by inserting the dipstick into the oil pan without screwing in the dipstick.
(d)
Check that there is no obstruction in front of the air intake opening that might impede the flow of
cooling air.
(e)
Check that there is no obstruction that might hinder pull-rope action.
SECTION III. LUBRICATION
4-7. GENERAL. Refer to Lubrication Order LO10-4320-316-12 for the lubrication instructions required for this unit.
4-4
|
