|
| |
TM10-4320-316-14
Table 2-1. Operator Preventive Maintenance Checks and Services
for DED Pump Assembly.
Location
Item
Interval
Item To
Procedure
Not Fully Mission
No.
Check/Service.
Capable If:
14
Before
FUEL TANK
ASSEMBLY
Inspect fuel tank for leaks. Check
for missing cap. Check for loose or
missing mounting hardware. Check
fuel level (See para. 2-7).
Fuel tank leaks. Cap is
missing.
Mounting
hardware is loose or
missing.
15
Before
FUEL FILTER,
INLET
Inspect for damaged or missing
inlet fuel filter. Check filter for
debris and clogging.
Inlet fuel filter is missing.
Filter is clogged with
debris.
16
Before
FUEL COCK
Inspect for damaged or leaking fuel
cock.
Fuel cock is damaged or
leaking.
17
Before
FUEL FILTER,
OUTLET
Remove fuel tank cap and check
bottom of tank for missing fuel
outlet filter.
Fuel
outlet
filter
is
missing.
18
Before
PIPE FUEL
GAUGE
Inspect pipe fuel gauge for leaks.
Check for loose or missing clamps.
Pipe fuel gauge leaks.
Clamps are loose or
missing.
19
Before
FUEL LINES
Inspect all fuel lines for damage or
leaks. Check for loose or missing
clamps.
Fuel lines leak. Clamps
are loose or missing.
20
Before
AIR CLEANER
Inspect air cleaner housing for
damage. Check for loose or
missing mounting hardware.
Air cleaner housing is
damaged.
Mounting
hardware is loose or
missing.
21
Before
FILTER
ELEMENT
Remove cover from air cleaner
housing
and
inspect
filter
for
clogging. Check gasket under air
cleaner cover for damage.
Filter element is missing.
Filter element is very
dirty or clogged.
22
Before
RECOIL
STARTER
Pull starter rope and check that
recoil starter engages and rotates
engine. Check that recoil starter
retracts starter rope when starter
rope handle is released.
Starter rope does not
engage engine. Starter
rope does not retract
when released.
2-9
|
