|
| |
TM10-4320-316-14
5-8.
FUEL INJECTOR VALVE ASSEMBLY REPLACEMENT. - Continued.
(2)
Carefully insert the fuel injection nozzle (5) into the cylinder block. Care must be taken in order to
avoid damage to nozzle gasket (6).
(3)
Make sure fuel injection nozzle (5) positioning pin slides (8) into the positioning slot.
(4)
Position the strap for the valve cover rubber plug and secure nozzle (5) to engine with two hex head
nuts (3) and retaining plate (4). Torque to 72-94 in-lb (80-100 cm-kg).
(5)
Install fuel return line (2) and clamp (1) to injector valve assembly.
5-8/(5-9 Blank)
|
