|
| |
TM 10-4320-316-14
4-28.
FUEL FILTER, INLET REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initlal Setup:
WARNING
Improper care in handling fuel can
cause fire and explosion which can
Tools Required
cause severe injury or death to
Tool Kit, General Mechanic's (Appendix B, Item 1)
operating personnel. To avoid fire
or explosion during engine
Material's Required
refueling:
None
Equipment Condition
DO NOT allow any flame
DED pump assembly shut down and cool.
producing material within 50
feet (15.25 m) of fuel during
equipment filling.
DO NOT smoke while refueling.
DO NOT let fuel drip onto any
hot surface.
DO NOT overfill fuel tank.
DO NOT refuel unit while
engine is running.
a. Removal (Refer to Figure 4-20).
(1)
Remove fuel tank cap (1) from fuel tank (2).
(2)
Remove inlet fuel filter (3).
b. Installation.
(1)
Install fuel inlet filter (3) into fuel tank (2).
(2)
Install fuel tank cap (1) onto fuel tank (2).
4-64
|
