|
| |
TM 10-4320-316-14
4-27. FUEL TANK ASSEMBLY REPAIR AND REPLACEMENT. - Continued.
c. Repair.
Repair is limited to replacement of defective parts.
d. Installation.
(1) Install two dampers (18), stay (17), and two bolts (16).
(2) Install pipe fuel gauge (15) and two clamps (14).
(3) Attach fuel tank (3) using two dampers (13), upper stay bracket (12), washer (11), lifting bolt (10), and hex
head screw (9).
(4) Connect fuel line hose (7) and hose clamp (6) to fuel tank (3) and then connect other end of hose to injection
pump (8).
(5) Connect overflow hose (5) and clamp (4) to fuel tank (3).
(6) Replace drain plug (2) and fuel cap (1).
(7) Check carefully for any leaks when filling the fuel tank.
4-62/(4-63 Blank)
|
