|
| |
TM 10-4320-311-14
5-14. Replace/Inspect/Test/Adjust Fuel Injection Pump.
This task covers:
a.
Removal
b.
Inspection
c.
Installation
d.
Test
e.
Adjustment
INITIAL SETUP
Tools
Equipment
Tool Kit, General Mechanics (Item 1,
Condition
Appendix B, Section III)
Para
Torque Wrench 0-175 in-lb (Item 3,
4-25
Fuel tank removed.
Appendix B, Section III)
4-26
Fuel injection pipe removed.
Figure 5-5. Replace Fuel Injection Pump
REMOVAL: Refer to Figure 5-5.
a.
Remove the lower fuel tank mounting bracket and rubber pads (1).
b.
Loosen hex nut (2) securing pump viewing access plate (3) and gasket (4). Discard gasket.
c.
Loosen two hex nuts (5) securing fuel injection pump (6), and remove pump together with base mounting plate
5-15
|
