|
| |
TM 10-4320-311-14
k.
If necessary, slide the front panel inward and from the inside of the panel, install fuel selection valve (7) into the
two front panel holes.
I.
Refer to Figure 4-18. Position fuel tank (3) and fuel tank stay bracket (9) on engine. Secure with two hex head
screws (8).
m.
Push fuel line hose (6) onto front panel fuel selection valve fitting and secure with clamp.
n.
Push overflow hose (5) onto injection nozzle (4) fitting and secure with clamp
o.
Install fuel tank drain plug (2) at the bottom right corner of fuel tank (3).
p.
Fill fuel tank (3) with fuel, then install fuel cap (1) onto fuel tank (3).
q.
Refer to Figure 4-16. Secure the sound enclosure front panel assembly to frame (6) with the nuts, washers, and
bolts previously removed.
r.
Refer to Figure 4-17. Secure auxiliary fuel input connection with washer (6) and retaining nut (5).
s.
Install compression fitting nut (4) onto auxiliary fuel input connection.
t.
Position fuel selection valve information plate (3) against the outside of the front panel and secure with two
screws (2).
u.
Install fuel selection valve handle (1).
v.
Refer to Figure 4-16. Screw oil filler tube (5) into engine crankcase.
w.
Push volute drain hose onto inside of panel fitting (4) and secure with clamp.
x.
Install inlet (suction) hose adapter (3) onto threaded pipe nipple.
y.
Install front ratchet strap bolt plates (2) and lift handle assemblies (1) onto frame (6).
4-41
|
