| |
TM 10-3835-231-23P
O - Repairable item. When uneconomically repairable, condemn and dispose of the item at unit or aviation unit
category.
F - Repairable item. When uneconomically repairable, condemn and dispose of the item at the intermediate
direct support or aviation intermediate category.
H - Repairable item. When uneconomically repairable, condemn and dispose of the item at the intermediate
general support category.
D - Repairable item. When beyond lower category repair capability, return to depot. Condemnation and
disposal of item not authorized below depot category.
L - Repairable item. Condemnation and disposal not authorized below specialized repair activity.
A - Item requires special handling or condemnation procedures because of specific reasons (i.e., precious
metal content, high dollar value, critical material, or hazardous material). Refer to appropriate
manuals/directives for specific instructions.
c. CAGEC, Column (3). The Commercial And Government Entity Code (CAGEC) is a 5-digit numeric
code which is used to identify the manufacturer, distributor, or Government agency, etc., that supplies the item.
d. Part Number, Column (4). Indicates the primary number used by the manufacturer (individual,
company, firm, corporation, or Government activity), which controls the design and characteristics of the item
by means of its engineering drawings, specifications, standards, and inspection requirements to identify an item
or range of items.
NOTE
When you use an NSN to requisition an item, the item you receive may have a
different part number from the part ordered, but go ahead and use it or furnish it as
the replacement part.
e. Description and USABLE ON CODE, Column 5.
This column includes the following information:
(1) The Federal item name and, when required, a minimum description to identify the item.
(2) The physical security classification of the item is indicated by the parenthetical entry (insert
applicable physical security classification abbreviation, e.g., Phy Sec C1 (C) - Confidential, Phy Sec C1 (S) -
Secret, Phy Sec C1 (T) - Top Secret).
(3) Items that are included in kits and sets are listed below the name of the kit or set.
(4) Spare/repair parts that make up an assembled item are listed immediately following the assembled
item line entry.
(5) Part numbers for bulk material are referenced in the description column in the line item entry for the
item to be manufactured/fabricated.
(6) When the item is not used, part to be used differs between serial numbers of the same model, the
effective serial numbers are shown as the last line of the description.
(7) The USABLE ON CODE, when applicable (see paragraph 5, Special Information).
(8) In the Special Tools List section, the Basis Of Issue (BOI) appears as the last line(s) in the entry for
each special tool, special TMDE, and other special support equipment. When density of equipments supported
exceeds density spread indicated in the basis of issue, the total authorization Is increased proportionately.
4
|