|
| |
TM 10-3835-231-13
5-6. FUEL SAMPLING ASSEMBLY REPAIR.
This task covers:
a. Disassembly
b. Repair
c. Assembly
INITIAL SETUP
Tools
Equipment Condition
Tool Kit, General Mechanics (Appendix B, Section III,
Fuel Sampling assembly removed. (See para 4-36.)
Item 1).
Material/Parts
Antisieze Tape (Appendix E, Item 6).
NOTE
Disassemble only to the extent necessary for repair.
a.
Disassembly.
Figure 5-6. Fuel Sampling Assembly
(1)
Remove plastic caps (1).
(2)
Loosen nut on compression fitting (2) and remove tube (3).
(3)
Remove compression fitting (2), needle valve (4), ball valve (5) and pipe nipple (6).
(4)
Remove four each nuts (7), flat washers (8), two U-bolts (9) and sampling table (10).
(5)
Remove four each flat washers (11) and nuts (12).
5-6
|
