|
| |
2-5.1 Hose Assemblies - Cont'd.
h.
2-Inch Hose, Collapsible, Dispensing (15 Units)
NSN
Figure:
2-35
Specification:
11588D, Type III, Class I
OD:
2-9/16 in., plus 1/8 in., minus 1/16 in.
ID:
2 in., plus or minus 1/32 in.
Weight:
1-1/4 lb./ft. (maximum..
Working Pressure:
100 psig
End Adapters:
(1) MS 27021-11 and (1) MS 27025-11, made
of aluminum alloy 356-T6
Cover:
Synthetic rubber not less than 5/64 in. thick
Reinforcement:
Cotton or synthetic fiber plies, extra
reinforcement extending 14 inches from each
end
Hose Tube:
Synthetic rubber, not less than 5/64 in. thick
Color:
Sand Matte
Identification:
Manufacturer's name or trademark, the type,
quarter and year of manufacture, working
pressure and the words, "Hose, Liquid
Petroleum Fuels, Dispensing, Collapsible"
Use:
The hose is provided in 25 ft. lengths for use in
the fuel dispensing assembly.
i.
1-1/2-Inch Hose. Collapsible, Dispensing (6 Units)
NSN 4720-00-901-7624
Figure:
2-35
Specification:
11588D, Type III, Class I
OD:
2 in., plus or minus 1/16 in.
ID:
1-1/2 in., plus or minus 1/32 in.
Weight:
1 lb./ft. (maximum)
Working Pressure:
100 psig
End Adapters:
(1) MS 27021-9 and (1) MS 27025-9 made of
aluminum alloy 356-T6
Cover:
Synthetic rubber not less than 3/64 in. thick
Reinforcement:
Cotton or synthetic fiber plies, extra rein-
forcement extending 14 inches from each end
Hose Tube:
Synthetic rubber, not less than 5/64 in. thick
Color:
Sand Matte
Identification:
Manufacturer's name or trademark, the type,
quarter and year of manufacture, working
pressure and the words, " Hose, Liquid
Petroleum Fuels, Dispensing, Collapsible"
Use:
The hose is provided in 25 ft. lengths for use in
the fuel dispensing assembly.
j.
1-Inch Hose, Collapsible, Dispensinq (25 Units)
NSN 4720-00-083-0049
Figure:
2-35
Specification:
11588D, Type III, Class I
2-31
|
