|
| |
2-5.1
Hose Assemblies - Cont'd .
Use:
The hose is provided in 25 and 50 ft. lengths.
The hose is used in the fuel dispensing assembly
and the 50,000 Gal. TPT optional tank
configuration.
f. 4-Inch Hose, Non-Collapsible.
Suction (96 Units)
NSN 4720-00-727-1339
Figure:
2-36
Specification:
MIL-H-370D, Type II
OD:
4-3/4 in., plus or minus 11/16 in.
ID:
4 in., plus or minus 1/32 in.
Working Pressure:
100 psig
End Adapters:
MS 27021-17 and MS 27025-17, aluminum alloy
356-T6
Cover:
Synthetic rubber not less than 5/64 in. thick
Reinforcement:
Cotton or synthetic fiber ply with a helix of
wound steel reinforcing wire
Hose Tube:
Synthetic rubber, not less than 5/64 in. thick
Color:
Sand Matte
Identification:
Manufacturer's name or trademark, the type,
quarter and year of manufacture, working
pressure and the words, "MIL-H-370, Type II,
Liquid Fuel".
Use:
Provided in 12 ft. lengths. Used in tanker-truck
receipt manifold, contaminated fuel module
and the 50,000 Gal. TPT optional tank
configuration
g. 3-Inch Hose, Collapsible. Dispensing (9 Units)
NSN 4720-00-083-0048
Figure:
2-35
Specification:
11588D, Type III, Class I
OD:
3-5/8 in., plus 1/8 in., minus 1/16 in.
ID:
3 in., plus or minus 1/32 in.
Weight:
1-7/8 lb./ft. (maximum)
Working Pressure:
125 psig
End Adapters:
MS 27021-15 and MS 27025-15, made of
aluminum alloy 356-T6
Cover:
Synthetic Rubber not less than 5/64 in. thick
Reinforcement:
Cotton or Synthetic Fiber Plies, extra
reinforcement extending 14 inches from each
end
Hose Tube:
Synthetic Rubber, not less than 5/64 in. thick
Color:
Sand Matte
Identification:
Manufacturer's name or trademark, the type,
quarter and year of manufacture, working
pressure and the words, "Hose, Liquid
Petroleum Fuels, Dispensing, Collapsible"
Use:
The hose is provided in 50 ft. lengths for use in
the fuel dispensing assembly.
2-30
|
