|
| |
TM 5-4930-235-13&P
(2) Test nozzle assembly for electrical continuity using a multimeter. Resistance shall not exceed 10 ohms
when tested at the following points:
(a) Latches in outlet end to ground plug.
(b) Latches in outlet end to ground clip.
(c) Latches in outlet end to coupling arms.
5-4.
Preparation For Storage of Shipment.
a.
Coil wire rope of ground clip assembly (2) and ground plug assembly (3). Secure with masking tape.
b. Wipe nozzle with a clean cloth.
c. Inspect nozzle for damaged or missing parts. Report any problems to your supervisor.
d. Place nozzle in water-vaporproof bag. Tape or seal bag.
e.
Place cushioning material and nozzle in fiberboard container.
f. Add cushioning material to fiberboard container to prevent movement of nozzle.
Change 2
(5-23 blank)/5-24
|
