|
| |
TM 5-4320-305-24
4-13. REPLACE/REPAIR CRANKCASE ASSEMBLY (Continued)
8
Inspect tappet bores (1) for excessive wear or damage. If repairable, follow REPAIR instructions.
If severely worn,
cracked, or damaged, replace crankcase (2).
9
Inspect all tapholes (3). Make sure they are clean. If necessary, retap in accordance with REPAIR instructions.
10
Inspect dished plug (4). Make sure plug is tightly seated in crankcase (2). If not, replace plug.
11
Inspect all parallel pin and plug holes for wear or damage. If excessively worn or damaged but repairable, retap
holes. If not repairable, replace crankcase.
4-108
|
