|
| |
TM 5-4320-305-24
4-10. REPLACE/REPAIR PISTON ASSEMBLY (Continued)
3
Insert connecting rod (4) into bottom of piston (3),
and place piston on two flat wooden blocks.
4
Insert piston pin (2) into piston pin bore (9) and
through small-end bushing (10) of connecting rod.
Push pin in until it contacts installed circlip (1) and
stops. Make sure arrow (11) on top of piston (3)
points toward pushrod cover tube bores (12) (inlet
and exhaust side).
5
Install second new circlip (1).
4-81
|
