Figure 3-9. Stator winding and connections.

TM 5-4320-234-34

Figure 3-9. Stator winding and connections.

10. Unsolder and separate the common leads; pull back

the insulating sleeves exposing the opposite end leads.

(2) With the stator disconnected from the

Connect the ohmmeter or test lamp probes to each pair

diode assemblies, test it for leakage and continuity. You

of the following test points:

can use either a good quality ohmmeter or test lamp (12

volts or 120 volts) to test the stator. Refer to figure 3-

Point A to point B

Point A to point C

Point B to point C

Point A to point D

Point B to point D

Point C to point D

3-12