SECTION I INTRODUCTION - TM-10-4320-324-24P0011

TM 10-4320-324-24P

UNIT, DIRECT SUPPORT AND GENERAL SUPPORT

MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST

SECTION I INTRODUCTION

SCOPE. This RPSTL lists and authorizes spares and repair parts; special tools; special test, measure-

ment, and diagnostic equipment (TMDE); and other special support equipment required for performance of unit,

direct support, and general support maintenance of the Pumping Assembly. It authorizes the requisitioning,

issue, and disposition of spares, repair parts and special tools as indicated by the source, maintenance and

recoverability (SMR) codes.

GENERAL. In addition to this section, Introduction, this Repair Parts and Special Tools List is divided

into the following sections:

Section II. Repair Parts List. A list of spares and repair parts authorized by this RPSTL for use in

the performance of maintenance. This list also includes parts which must be removed for replacement of the

authorized parts. Parts lists are composed of functional groups in ascending alphanumeric sequence, with the

parts in each group listed in ascending figure and item number sequence. Bulk materials are listed in item

name sequence. Repair parts kits are listed separately in their own functional group within Section II. Repair

parts for repairable special tools are also listed in this section. Items are shown in the associated illustration(s)

figure(s).

Section III. Special Tools List. A list of special tools, special TMDE, and other special support

equipment authorized by this RPSTL (as indicated by Basis of Issue (BOI) information in DESCRIPTION AND

USABLE ON CODE column) for the performance of maintenance.

Section IV. Cross-references Indexes. A list, in National Item Identification Number (NIIN)

sequence, of all National stock numbered items appearing in the listing, followed by a list in alphanumeric

sequence of all part numbers appearing in the listings. National stock numbers and part numbers are cross

referenced to each illustration figure and item number appearance. The figure and item number index lists

figure and item number in alphanumeric sequence and cross references NSN, CAGEC and part number.

EXPLANATION OF COLUMNS (Sections II AND III,)

ITEM NO. (Column (1)). Indicates the number used to identify items called out in the illustration.

SMR Code (Column (2)). The Source, Maintenance, and Recoverability (SMR) code is a 5-

position code containing supply/requisitioning information, maintenance category authorization criteria, and dis-

position instruction, as shown in the following breakout: