|
| |
T M
1 0 - 3 8 3 5 - 2 1 9 - 1 4
1-9A. Location and Description of Major Components (Model FIHK-1OO) (Figure 1-7).
SLING ASSEMBLY. Used for lifting flaking boxes. Constructed of steel pipe, wire cables, attach hooks and lift
rings.
HOSE ASSEMBLY AND FLAKING BOX. The hoseline outfit consists of 13 hose assembly and flaking boxes.
Each hose consists of two 500-foot sections of collapsible hose coupled together per flaking box. The flaking
box provides for packing and transportation of the hoses. Steel weldment construction with lifting
provisions.
ROADWAY CROSSING GUARD). The hoseline outfit consists of 20 roadway crossing guards. The guard
steel channel that provides protection of hoseline when routed under road surfaces and train tracks.
is a
DISPLACEMENT AND EVACUATION KIT CHEST ASSEMBLY (figure 1-8) A welded chest assembly the contains
compartments for the storage of the displacement and evacuation kit. The displacement and evacuation kit
consists of and ejector assembly, ball inlet, displacement ball, ball receiver assembly, eight pipe coupling
clamps and 16 pipe caps. The kit is used to remove liquid fuel, vapors and air from hoselines so that they cam
be easily packed into flaking boxes.
REPAIR KIT CHEST ASSEMBLY (figure 1-9.1) A welded chest assembly that contains compartments for the
storage of the repair kit. The repair kit consists of five hose coupling adapters, three pipe coupling clamps
and gaskets, five cans of rubber adhesive, four hose clamps, one hammer, one knife, 150 feet of rubber tape,
350 feet of plastic tape, ten cap screws, nuts and flat washers, one flat tip screwdriver, one 3/4 inch socket,
one 9/16 socket, one speed handle, one bundle of wiping rags and 10 hose-to-hose mender adapters.
SUSPENSION KIT CHEST ASSEMBLY (figure 1-10). A welded chest assembly that contains compartments for
the storage of the suspension kit. The suspension kit consists of four tackle blocks, 25 wire rope clamps, a
350-foot spool of wire rope, a d 350-foot spool of manila rope, 60 fabric hose saddles and shackles, 14 steel
stakes, four wire rope thimbles and four turnbuckles.
PACKING KIT CHEST ASSEMBLY (figure 1-11). A welded chest assembly that is used for storage of the packing
kit. The packing kit consists of a pullboard, left-hand and right-hand hose retaining brackets and a 3/4 ton
chain hoist.
FLOW CONTROL KIT ASSEMBLY (figure 1-12) A welded chest assembly that contains compartments for the
storage of the flow control kit. The flow control kit consists of eight pipe coupling clamps, two male quick
disconnect coupling halves, two female quick disconnect coupling halves, two hose assemblies, two grooved-
to-external thread couplings, two grooved-to-internal thread couplings, a strainer, two check valves, a tee,
steel fish tape and two gate valves. The kit is used to control the flow of fuel in the hoseline under all
o p e r a t i n g c o n d i t i o n s .
Change 1
1-9
|
