|
| |
T M 1 0 - 3 8 3 5 - 2 1 9 - 1 4
(2) Major breaks and ruptures (Models ADC-1200 and 1461) (figure 3-8)
(a)
(b)
(c)
(d)
Shut down hoseline completely. Remove all pressure on hoseline.
Apply hose clamps on both sides of break, split, or hole, 3 feet (0.9 m) beyond damaged areas.
N O T E
Always mark, score and cut hose squarely and leave no ragged ends.
Cut hose (1) approximately 6 inches (152 mm) from edge of damaged area, and examine interior for
further damage. Cut hose back again, if necessary, to reach undamaged area. Hose must be cut
squarely and evenly.
Drain hose ends into appropriate container and wipe ends dry.
3 - 10
Figure 3-8. Major Breaks and Ruptures, Repair (Models ADC-1200 and 1461) (Sheet 1 of 2).
Change 1
|
