|
| |
TM 9-2330-398-24
Using hacksaw and Table D-10, cut tube to correct length.
Figure D9. Tube
NOTE
Tubing can be reused only if sufficient length remains to prevent kinking after
assembly. If not, replace them.
1.
Using hose cutter and Table D-1 1, cut tubing for either new or replacement lengths.
NOTE
Nut is part of fitting to which tubing assembly connected. Order the fitting in the
quantity listed in Table D-11 to obtain the nut.
2.
Install nut (3) on tubing (4).
3.
Install compression sleeve (2), if required, and insert (1) in tubing (4).
Figure D-10. Tubing
Table D-11. Tubing Common Hardware
Part Number
Item Number
1
2
3
11670918-1
2 Insert, Tube Fitting AC2511
2 Sleeve, Compression CPR-
1 Part of Elbow, Pipe to Tube
(16662) (4730-00-293-7108)
102321-1 (19207) (4730-
6-6 120202BA (81343)
079-8821)
(4730-00-289-0155)
12275560-1
2 Insert, Tube Fitting HO-
1 Part of Adapter, Straight,
2 Part of Elbow, Pipe to Tube
159-4 (79146) (4730-00-132-
Pipe 8-6 1020102BA (81343)
VS269AB4-2 (93061)
4588)
(4730-00-289-0051)
(4730-00-921-3240)
D-11
|
