|
| |
TM 9-2330-398-24
4-1.
ENGINE ASSEMBLY REPAIR (continued).
41.
Install bracket (39) on cylinder block (38) with new lockwasher (40) and screw (41).
42.
Install new gasket (42) and oil base (43) with 10 screws (45), and new lockwashers (44). Tighten screws between
45 and 50 Ib-ft (61 and 68 Nom).
NOTE
Make sure tappets are riding on cams of camshaft before continuing with assembly.
43.
Install two new cylinder head gaskets (29) and eight tappets (30) in cylinder block (38).
44.
Install 16 packings (31) and washers (32), and eight springs (33) and push rod shields (34) in cylinder block (38).
45.
Install two cylinder heads (28) on cylinder block (38) with 12 screws (36) and washers (37). Tighten screws (35)
hand-tight.
4-30
|
