|
| |
TM 9-2330-398-24
4-1.
ENGINE ASSEMBLY REPAIR (continued).
16.
Remove retaining ring (68) from center pin of camshaft (66).
17.
Remove governor cup (67) and five flyballs (69) from camshaft (66).
CAUTION
When removing camshaft assembly, be careful not to damage bearings.
18.
Remove camshaft (66) from cylinder block (38) as a group. Remove retaining ring (63) and press gear (64) from
camshaft (66).
19.
Remove key (65) from camshaft (66).
CAUTION
Use care not to damage gear teeth N crankshaft gear is to be reused.
20.
Remove crankshaft gear lock ring (70), retaining washer (71), and crankshaft gear (72) from backplate (55).
21.
Remove two screws (73) and lockwashers (74) and oil pump (75) from backplate (55). Discard lockwashers.
4-7
|
